Johnson Brothers :: HOME

Click for more information

RFQ  |  Capabilities  |  Processes  | About Us Work Samples | Contact Us
Johnson Brothers Metal Forming Co.
Search Catalog
      GO   
 All Categories    Lock Seam Tubing & Lockseam Tubes
All Categories > Specialty Tubing > Lock Seam Tubing & Lockseam Tubes > Item # LSCIR-01  

Item # LSCIR-01, Tubing & Tubes - Lock Seam - Round


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Lockseam Tubing is Formed From All Types of Metals Either Plain or Prepainted, Galvanized, Prepolished, Prelaminated Vinyl, Preanodized, Preplated, Pre-Embossed, Aluminized, Galvannealled, Strippable- PVC Covered.

    Inline Press Fabrications of: Holes, Slots, Notching, Tabs, Shear Forms, End Fabricating, Cut to Length, Pointing & Staking, Roll Edged Ends, Flattened Ends, and more.
  • Secondary Fabricating: End Fabricating, Roll Edge Ends, Bent and Flattened Ends, Cuttouts, and more.
  • Telescoping Sets Available for Lock Seam Tubes
  • Lock Seams are Tight and will not break open when bent, or flattened, or twisted.
  • Other Custom Special Shapes are possible, along with Finned or Flanged Seams.
  • Strippable PVC Protection can be added to lock seam tubes for Protecting Decorative Finishes.
  • Double Sided Adhesive Tape and Other Materials can be Applied Inline during forming.
  • Can be economical with Thin Wall, with Prefinishing and/or Inline Fabricating.
  • Thicker Wall Thicknesses can be provided with Special Tooling required. Ends of lock seam tubes can be Clean Cut, Dimple Free, using Inline Prenotching Tooling. Not Air or Water Pressure Holding, Collapses when Bent Steel Should be Prefinished. Raw Finished Steel is not as economical to Lock Seam Tubes






Specifications

Description

Dies are available for most sizes. Tooling for other diameters, special sizes, etc., can be done quickly and inexpensively in our plant. Inline and Secondary Fabrications such as: Telescoping, Dedimpling, Hole Punching, End Fabricating and Swaging are also available. Special Square, Rectangular, Round, Hex, Oval and other variations are also available. There are also special Gap openings and thicknesses available at little or no extra tooling cost. The following metals can be plain or prepainted, prelaminated, preanodized, preplated, pre-embossed, prepolished, prelaquered, strippable pvc covered, pregalvanized, etc. : Steel, Stainless, Aluminum, Brass, Bronze, Copper, Alloys, Clad and more. We can fully telescope all round tubing and special sizes in Oval, Hex, Square and Rectangular tubing are also available. Outside Dimensions Offered: 1/2', 5/8', 3/4', .860', 7/8', 29/32', 15/16', .985', 1', 1.225', 1 1/4', 1.280', 1.430', 1.465', 1 1/2', and more.


 DOWNLOADS 

Standard Sizes Chart - Lock Seam Tubing
(PDF, 27KB)



We're looking forward to fulfilling all of your custom roll forming needs.
5744 McDermott Drive - Berkeley, IL 60163-1102 (Chicago Suburb)
- Telephone: (708) 449-7050 - 24 Hour Fax: (708) 449-0042

Site Map | Site Created by: Ecreativeworks
U-ChannelsBox ChannelsHat ChannelsAnglesOpen Seam TubingZee Bars